主頁 > 知識庫 > 詳解Golang實現請求限流的幾種辦法

詳解Golang實現請求限流的幾種辦法

熱門標簽:不封卡外呼系統 寧波語音外呼系統公司 仙桃400電話辦理 鄭州智能語音電銷機器人價格 重慶慶云企業400電話到哪申請 地圖標注免費定制店 上海極信防封電銷卡價格 湛江crm外呼系統排名 宿遷便宜外呼系統代理商

簡單的并發控制

利用 channel 的緩沖設定,我們就可以來實現并發的限制。我們只要在執行并發的同時,往一個帶有緩沖的 channel 里寫入點東西(隨便寫啥,內容不重要)。讓并發的 goroutine在執行完成后把這個 channel 里的東西給讀走。這樣整個并發的數量就講控制在這個 channel的緩沖區大小上。

比如我們可以用一個 bool 類型的帶緩沖 channel 作為并發限制的計數器。

chLimit := make(chan bool, 1)

然后在并發執行的地方,每創建一個新的 goroutine,都往 chLimit 里塞個東西。

for i, sleeptime := range input {
    chs[i] = make(chan string, 1)
    chLimit - true
    go limitFunc(chLimit, chs[i], i, sleeptime, timeout)
}

這里通過 go 關鍵字并發執行的是新構造的函數。他在執行完后,會把 chLimit的緩沖區里給消費掉一個。

limitFunc := func(chLimit chan bool, ch chan string, task_id, sleeptime, timeout int) {
    Run(task_id, sleeptime, timeout, ch)
    -chLimit
}

這樣一來,當創建的 goroutine 數量到達 chLimit 的緩沖區上限后。主 goroutine 就掛起阻塞了,直到這些 goroutine 執行完畢,消費掉了 chLimit 緩沖區中的數據,程序才會繼續創建新的 goroutine 。我們并發數量限制的目的也就達到了。

以下是完整代碼:

package main
 
import (
    "fmt"
    "time"
)
 
func Run(task_id, sleeptime, timeout int, ch chan string) {
    ch_run := make(chan string)
    go run(task_id, sleeptime, ch_run)
    select {
    case re := -ch_run:
        ch - re
    case -time.After(time.Duration(timeout) * time.Second):
        re := fmt.Sprintf("task id %d , timeout", task_id)
        ch - re
    }
}
 
func run(task_id, sleeptime int, ch chan string) {
 
    time.Sleep(time.Duration(sleeptime) * time.Second)
    ch - fmt.Sprintf("task id %d , sleep %d second", task_id, sleeptime)
    return
}
 
func main() {
    input := []int{3, 2, 1}
    timeout := 2
    chLimit := make(chan bool, 1)
    chs := make([]chan string, len(input))
    limitFunc := func(chLimit chan bool, ch chan string, task_id, sleeptime, timeout int) {
        Run(task_id, sleeptime, timeout, ch)
        -chLimit
    }
    startTime := time.Now()
    fmt.Println("Multirun start")
    for i, sleeptime := range input {
        chs[i] = make(chan string, 1)
        chLimit - true
        go limitFunc(chLimit, chs[i], i, sleeptime, timeout)
    }
 
    for _, ch := range chs {
        fmt.Println(-ch)
    }
    endTime := time.Now()
    fmt.Printf("Multissh finished. Process time %s. Number of task is %d", endTime.Sub(startTime), len(input))
}

運行結果:

Multirun start
task id 0 , timeout
task id 1 , timeout
task id 2 , sleep 1 second
Multissh finished. Process time 5s. Number of task is 3

如果修改并發限制為2:

chLimit := make(chan bool, 2)

運行結果:

Multirun start
task id 0 , timeout
task id 1 , timeout
task id 2 , sleep 1 second
Multissh finished. Process time 3s. Number of task is 3

使用計數器實現請求限流

限流的要求是在指定的時間間隔內,server 最多只能服務指定數量的請求。實現的原理是我們啟動一個計數器,每次服務請求會把計數器加一,同時到達指定的時間間隔后會把計數器清零;這個計數器的實現代碼如下所示:

type RequestLimitService struct {
 Interval time.Duration
 MaxCount int
 Lock     sync.Mutex
 ReqCount int
}
 
func NewRequestLimitService(interval time.Duration, maxCnt int) *RequestLimitService {
 reqLimit := RequestLimitService{
  Interval: interval,
  MaxCount: maxCnt,
 }
 
 go func() {
  ticker := time.NewTicker(interval)
  for {
   -ticker.C
   reqLimit.Lock.Lock()
   fmt.Println("Reset Count...")
   reqLimit.ReqCount = 0
   reqLimit.Lock.Unlock()
  }
 }()
 
 return reqLimit
}
 
func (reqLimit *RequestLimitService) Increase() {
 reqLimit.Lock.Lock()
 defer reqLimit.Lock.Unlock()
 
 reqLimit.ReqCount += 1
}
 
func (reqLimit *RequestLimitService) IsAvailable() bool {
 reqLimit.Lock.Lock()
 defer reqLimit.Lock.Unlock()
 
 return reqLimit.ReqCount  reqLimit.MaxCount
}

在服務請求的時候, 我們會對當前計數器和閾值進行比較,只有未超過閾值時才進行服務:

var RequestLimit = NewRequestLimitService(10 * time.Second, 5)
 
func helloHandler(w http.ResponseWriter, r *http.Request) {
 if RequestLimit.IsAvailable() {
  RequestLimit.Increase()
  fmt.Println(RequestLimit.ReqCount)
  io.WriteString(w, "Hello world!\n")
 } else {
  fmt.Println("Reach request limiting!")
  io.WriteString(w, "Reach request limit!\n")
 }
}
 
func main() {
 fmt.Println("Server Started!")
 http.HandleFunc("/", helloHandler)
 http.ListenAndServe(":8000", nil)
}

完整代碼url:https://github.com/hiberabyss/JustDoIt/blob/master/RequestLimit/request_limit.go

使用golang官方包實現httpserver頻率限制

使用golang來編寫httpserver時,可以使用官方已經有實現好的包:

import(
    "fmt"
    "net"
    "golang.org/x/net/netutil"
)
 
func main() {
    l, err := net.Listen("tcp", "127.0.0.1:0")
    if err != nil {
        fmt.Fatalf("Listen: %v", err)
    }
    defer l.Close()
    l = LimitListener(l, max)
    
    http.Serve(l, http.HandlerFunc())
    
    //bla bla bla.................
}

源碼如下(url : https://github.com/golang/net/blob/master/netutil/listen.go),基本思路就是為連接數計數,通過make chan來建立一個最大連接數的channel, 每次accept就+1,close時候就-1. 當?shù)竭_(dá)最大連接數時,就等待空閑連接出來之后再accept。

// Copyright 2013 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
 
// Package netutil provides network utility functions, complementing the more
// common ones in the net package.
package netutil // import "golang.org/x/net/netutil"
 
import (
    "net"
 "sync"
)
 
// LimitListener returns a Listener that accepts at most n simultaneous
// connections from the provided Listener.
func LimitListener(l net.Listener, n int) net.Listener {
 return limitListener{
  Listener: l,
  sem:      make(chan struct{}, n),
  done:     make(chan struct{}),
 }
}
 
type limitListener struct {
 net.Listener
 sem       chan struct{}
 closeOnce sync.Once     // ensures the done chan is only closed once
 done      chan struct{} // no values sent; closed when Close is called
}
 
// acquire acquires the limiting semaphore. Returns true if successfully
// accquired, false if the listener is closed and the semaphore is not
// acquired.
func (l *limitListener) acquire() bool {
 select {
 case -l.done:
  return false
 case l.sem - struct{}{}:
  return true
 }
}
func (l *limitListener) release() { -l.sem }
 
func (l *limitListener) Accept() (net.Conn, error) {
    //如果sem滿了,就會阻塞在這
 acquired := l.acquire()
 // If the semaphore isn't acquired because the listener was closed, expect
 // that this call to accept won't block, but immediately return an error.
 c, err := l.Listener.Accept()
 if err != nil {
  if acquired {
   l.release()
  }
  return nil, err
 }
 return limitListenerConn{Conn: c, release: l.release}, nil
}
 
func (l *limitListener) Close() error {
 err := l.Listener.Close()
 l.closeOnce.Do(func() { close(l.done) })
 return err
}
 
type limitListenerConn struct {
 net.Conn
 releaseOnce sync.Once
 release     func()
}
 
func (l *limitListenerConn) Close() error {
 err := l.Conn.Close()
    //close時釋放占用的sem
 l.releaseOnce.Do(l.release)
 return err
}

使用Token Bucket(令牌桶算法)實現請求限流

在開發高并發系統時有三把利器用來保護系統:緩存、降級和限流!為了保證在業務高峰期,線上系統也能保證一定的彈性和穩定性,最有效的方案就是進行服務降級了,而限流就是降級系統最常采用的方案之一。

這里為大家推薦一個開源庫https://github.com/didip/tollbooth,但是,如果您想要一些簡單的、輕量級的或者只是想要學習的東西,實現自己的中間件來處理速率限制并不困難。今天我們就來聊聊如何實現自己的一個限流中間件

首先我們需要安裝一個提供了 Token bucket (令牌桶算法)的依賴包,上面提到的toolbooth 的實現也是基于它實現的:

$ go get golang.org/x/time/rate

先看Demo代碼的實現:

package main
 
import (
    "net/http"
    "golang.org/x/time/rate"
)
 
var limiter = rate.NewLimiter(2, 5)
func limit(next http.Handler) http.Handler {
    return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
        if limiter.Allow() == false {
            http.Error(w, http.StatusText(429), http.StatusTooManyRequests)
            return
        }
        next.ServeHTTP(w, r)
    })
}
 
func main() {
    mux := http.NewServeMux()
    mux.HandleFunc("/", okHandler)
    // Wrap the servemux with the limit middleware.
    http.ListenAndServe(":4000", limit(mux))
}
 
func okHandler(w http.ResponseWriter, r *http.Request) {
    w.Write([]byte("OK"))
}

然后看看 rate.NewLimiter的源碼:

算法描述:用戶配置的平均發送速率為r,則每隔1/r秒一個令牌被加入到桶中(每秒會有r個令牌放入桶中),桶中最多可以存放b個令牌。如果令牌到達時令牌桶已經滿了,那么這個令牌會被丟棄;

// Copyright 2015 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Package rate provides a rate limiter.
package rate
 
import (
 "fmt"
 "math"
 "sync"
 "time"
 
 "golang.org/x/net/context"
)
 
// Limit defines the maximum frequency of some events.
// Limit is represented as number of events per second.
// A zero Limit allows no events.
type Limit float64
 
// Inf is the infinite rate limit; it allows all events (even if burst is zero).
const Inf = Limit(math.MaxFloat64)
 
// Every converts a minimum time interval between events to a Limit.
func Every(interval time.Duration) Limit {
 if interval = 0 {
  return Inf
 }
 return 1 / Limit(interval.Seconds())
}
 
// A Limiter controls how frequently events are allowed to happen.
// It implements a "token bucket" of size b, initially full and refilled
// at rate r tokens per second.
// Informally, in any large enough time interval, the Limiter limits the
// rate to r tokens per second, with a maximum burst size of b events.
// As a special case, if r == Inf (the infinite rate), b is ignored.
// See https://en.wikipedia.org/wiki/Token_bucket for more about token buckets.
//
// The zero value is a valid Limiter, but it will reject all events.
// Use NewLimiter to create non-zero Limiters.
//
// Limiter has three main methods, Allow, Reserve, and Wait.
// Most callers should use Wait.
//
// Each of the three methods consumes a single token.
// They differ in their behavior when no token is available.
// If no token is available, Allow returns false.
// If no token is available, Reserve returns a reservation for a future token
// and the amount of time the caller must wait before using it.
// If no token is available, Wait blocks until one can be obtained
// or its associated context.Context is canceled.
//
// The methods AllowN, ReserveN, and WaitN consume n tokens.
type Limiter struct {
 //maximum token, token num per second
 limit Limit
 //burst field, max token num
 burst int
 mu    sync.Mutex
 //tokens num, change
 tokens float64
 // last is the last time the limiter's tokens field was updated
 last time.Time
 // lastEvent is the latest time of a rate-limited event (past or future)
 lastEvent time.Time
}
 
// Limit returns the maximum overall event rate.
func (lim *Limiter) Limit() Limit {
 lim.mu.Lock()
 defer lim.mu.Unlock()
 return lim.limit
}
 
// Burst returns the maximum burst size. Burst is the maximum number of tokens
// that can be consumed in a single call to Allow, Reserve, or Wait, so higher
// Burst values allow more events to happen at once.
// A zero Burst allows no events, unless limit == Inf.
func (lim *Limiter) Burst() int {
 return lim.burst
}
 
// NewLimiter returns a new Limiter that allows events up to rate r and permits
// bursts of at most b tokens.
func NewLimiter(r Limit, b int) *Limiter {
 return Limiter{
  limit: r,
  burst: b,
 }
}
 
// Allow is shorthand for AllowN(time.Now(), 1).
func (lim *Limiter) Allow() bool {
 return lim.AllowN(time.Now(), 1)
}
 
// AllowN reports whether n events may happen at time now.
// Use this method if you intend to drop / skip events that exceed the rate limit.
// Otherwise use Reserve or Wait.
func (lim *Limiter) AllowN(now time.Time, n int) bool {
 return lim.reserveN(now, n, 0).ok
}
 
// A Reservation holds information about events that are permitted by a Limiter to happen after a delay.
// A Reservation may be canceled, which may enable the Limiter to permit additional events.
type Reservation struct {
 ok     bool
 lim    *Limiter
 tokens int
 //This is the time to action
 timeToAct time.Time
 // This is the Limit at reservation time, it can change later.
 limit Limit
}
 
// OK returns whether the limiter can provide the requested number of tokens
// within the maximum wait time.  If OK is false, Delay returns InfDuration, and
// Cancel does nothing.
func (r *Reservation) OK() bool {
 return r.ok
}
 
// Delay is shorthand for DelayFrom(time.Now()).
func (r *Reservation) Delay() time.Duration {
 return r.DelayFrom(time.Now())
}
 
// InfDuration is the duration returned by Delay when a Reservation is not OK.
const InfDuration = time.Duration(163 - 1)
 
// DelayFrom returns the duration for which the reservation holder must wait
// before taking the reserved action.  Zero duration means act immediately.
// InfDuration means the limiter cannot grant the tokens requested in this
// Reservation within the maximum wait time.
func (r *Reservation) DelayFrom(now time.Time) time.Duration {
 if !r.ok {
  return InfDuration
 }
 delay := r.timeToAct.Sub(now)
 if delay  0 {
  return 0
 }
 return delay
}
 
// Cancel is shorthand for CancelAt(time.Now()).
func (r *Reservation) Cancel() {
 r.CancelAt(time.Now())
 return
}
 
// CancelAt indicates that the reservation holder will not perform the reserved action
// and reverses the effects of this Reservation on the rate limit as much as possible,
// considering that other reservations may have already been made.
func (r *Reservation) CancelAt(now time.Time) {
 if !r.ok {
  return
 }
 r.lim.mu.Lock()
 defer r.lim.mu.Unlock()
 if r.lim.limit == Inf || r.tokens == 0 || r.timeToAct.Before(now) {
  return
 }
 // calculate tokens to restore
 // The duration between lim.lastEvent and r.timeToAct tells us how many tokens were reserved
 // after r was obtained. These tokens should not be restored.
 restoreTokens := float64(r.tokens) - r.limit.tokensFromDuration(r.lim.lastEvent.Sub(r.timeToAct))
 if restoreTokens = 0 {
  return
 }
 // advance time to now
 now, _, tokens := r.lim.advance(now)
 // calculate new number of tokens
 tokens += restoreTokens
 if burst := float64(r.lim.burst); tokens > burst {
  tokens = burst
 }
 // update state
 r.lim.last = now
 r.lim.tokens = tokens
 if r.timeToAct == r.lim.lastEvent {
  prevEvent := r.timeToAct.Add(r.limit.durationFromTokens(float64(-r.tokens)))
  if !prevEvent.Before(now) {
   r.lim.lastEvent = prevEvent
  }
 }
 return
}
 
// Reserve is shorthand for ReserveN(time.Now(), 1).
func (lim *Limiter) Reserve() *Reservation {
 return lim.ReserveN(time.Now(), 1)
}
 
// ReserveN returns a Reservation that indicates how long the caller must wait before n events happen.
// The Limiter takes this Reservation into account when allowing future events.
// ReserveN returns false if n exceeds the Limiter's burst size.
// Usage example:
//   r, ok := lim.ReserveN(time.Now(), 1)
//   if !ok {
//     // Not allowed to act! Did you remember to set lim.burst to be > 0 ?
//   }
//   time.Sleep(r.Delay())
//   Act()
// Use this method if you wish to wait and slow down in accordance with the rate limit without dropping events.
// If you need to respect a deadline or cancel the delay, use Wait instead.
// To drop or skip events exceeding rate limit, use Allow instead.
func (lim *Limiter) ReserveN(now time.Time, n int) *Reservation {
 r := lim.reserveN(now, n, InfDuration)
 return r
}
 
// Wait is shorthand for WaitN(ctx, 1).
func (lim *Limiter) Wait(ctx context.Context) (err error) {
 return lim.WaitN(ctx, 1)
}
 
// WaitN blocks until lim permits n events to happen.
// It returns an error if n exceeds the Limiter's burst size, the Context is
// canceled, or the expected wait time exceeds the Context's Deadline.
func (lim *Limiter) WaitN(ctx context.Context, n int) (err error) {
 if n > lim.burst {
  return fmt.Errorf("rate: Wait(n=%d) exceeds limiter's burst %d", n, lim.burst)
 }
 // Check if ctx is already cancelled
 select {
 case -ctx.Done():
  return ctx.Err()
 default:
 }
 // Determine wait limit
 now := time.Now()
 waitLimit := InfDuration
 if deadline, ok := ctx.Deadline(); ok {
  waitLimit = deadline.Sub(now)
 }
 // Reserve
 r := lim.reserveN(now, n, waitLimit)
 if !r.ok {
  return fmt.Errorf("rate: Wait(n=%d) would exceed context deadline", n)
 }
 // Wait
 t := time.NewTimer(r.DelayFrom(now))
 defer t.Stop()
 select {
 case -t.C:
  // We can proceed.
  return nil
 case -ctx.Done():
  // Context was canceled before we could proceed.  Cancel the
  // reservation, which may permit other events to proceed sooner.
  r.Cancel()
  return ctx.Err()
 }
}
 
// SetLimit is shorthand for SetLimitAt(time.Now(), newLimit).
func (lim *Limiter) SetLimit(newLimit Limit) {
 lim.SetLimitAt(time.Now(), newLimit)
}
 
// SetLimitAt sets a new Limit for the limiter. The new Limit, and Burst, may be violated
// or underutilized by those which reserved (using Reserve or Wait) but did not yet act
// before SetLimitAt was called.
func (lim *Limiter) SetLimitAt(now time.Time, newLimit Limit) {
 lim.mu.Lock()
 defer lim.mu.Unlock()
 now, _, tokens := lim.advance(now)
 lim.last = now
 lim.tokens = tokens
 lim.limit = newLimit
}
 
// reserveN is a helper method for AllowN, ReserveN, and WaitN.
// maxFutureReserve specifies the maximum reservation wait duration allowed.
// reserveN returns Reservation, not *Reservation, to avoid allocation in AllowN and WaitN.
func (lim *Limiter) reserveN(now time.Time, n int, maxFutureReserve time.Duration) Reservation {
 lim.mu.Lock()
 defer lim.mu.Unlock()
 if lim.limit == Inf {
  return Reservation{
   ok:        true,
   lim:       lim,
   tokens:    n,
   timeToAct: now,
  }
 }
 now, last, tokens := lim.advance(now)
 // Calculate the remaining number of tokens resulting from the request.
 tokens -= float64(n)
 // Calculate the wait duration
 var waitDuration time.Duration
 if tokens  0 {
  waitDuration = lim.limit.durationFromTokens(-tokens)
 }
 // Decide result
 ok := n = lim.burst  waitDuration = maxFutureReserve
 // Prepare reservation
 r := Reservation{
  ok:    ok,
  lim:   lim,
  limit: lim.limit,
 }
 if ok {
  r.tokens = n
  r.timeToAct = now.Add(waitDuration)
 }
 // Update state
 if ok {
  lim.last = now
  lim.tokens = tokens
  lim.lastEvent = r.timeToAct
 } else {
  lim.last = last
 }
 return r
}
 
// advance calculates and returns an updated state for lim resulting from the passage of time.
// lim is not changed.
func (lim *Limiter) advance(now time.Time) (newNow time.Time, newLast time.Time, newTokens float64) {
 last := lim.last
 if now.Before(last) {
  last = now
 }
 // Avoid making delta overflow below when last is very old.
 maxElapsed := lim.limit.durationFromTokens(float64(lim.burst) - lim.tokens)
 elapsed := now.Sub(last)
 if elapsed > maxElapsed {
  elapsed = maxElapsed
 }
 // Calculate the new number of tokens, due to time that passed.
 delta := lim.limit.tokensFromDuration(elapsed)
 tokens := lim.tokens + delta
 if burst := float64(lim.burst); tokens > burst {
  tokens = burst
 }
 return now, last, tokens
}
 
// durationFromTokens is a unit conversion function from the number of tokens to the duration
// of time it takes to accumulate them at a rate of limit tokens per second.
func (limit Limit) durationFromTokens(tokens float64) time.Duration {
 seconds := tokens / float64(limit)
 return time.Nanosecond * time.Duration(1e9*seconds)
}
 
// tokensFromDuration is a unit conversion function from a time duration to the number of tokens
// which could be accumulated during that duration at a rate of limit tokens per second.
func (limit Limit) tokensFromDuration(d time.Duration) float64 {
 return d.Seconds() * float64(limit)
}

雖然在某些情況下使用單個全局速率限制器非常有用,但另一種常見情況是基于IP地址或API密鑰等標識符為每個用戶實施速率限制器。我們將使用IP地址作為標識符。簡單實現代碼如下:

package main
import (
    "net/http"
    "sync"
    "time"
    "golang.org/x/time/rate"
)
// Create a custom visitor struct which holds the rate limiter for each
// visitor and the last time that the visitor was seen.
type visitor struct {
    limiter  *rate.Limiter
    lastSeen time.Time
}
// Change the the map to hold values of the type visitor.
var visitors = make(map[string]*visitor)
var mtx sync.Mutex
// Run a background goroutine to remove old entries from the visitors map.
func init() {
    go cleanupVisitors()
}
func addVisitor(ip string) *rate.Limiter {
    limiter := rate.NewLimiter(2, 5)
    mtx.Lock()
    // Include the current time when creating a new visitor.
    visitors[ip] = visitor{limiter, time.Now()}
    mtx.Unlock()
    return limiter
}
func getVisitor(ip string) *rate.Limiter {
    mtx.Lock()
    v, exists := visitors[ip]
    if !exists {
        mtx.Unlock()
        return addVisitor(ip)
    }
    // Update the last seen time for the visitor.
    v.lastSeen = time.Now()
    mtx.Unlock()
    return v.limiter
}
// Every minute check the map for visitors that haven't been seen for
// more than 3 minutes and delete the entries.
func cleanupVisitors() {
    for {
        time.Sleep(time.Minute)
        mtx.Lock()
        for ip, v := range visitors {
            if time.Now().Sub(v.lastSeen) > 3*time.Minute {
                delete(visitors, ip)
            }
        }
        mtx.Unlock()
    }
}
func limit(next http.Handler) http.Handler {
    return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
        limiter := getVisitor(r.RemoteAddr)
        if limiter.Allow() == false {
            http.Error(w, http.StatusText(429), http.StatusTooManyRequests)
            return
        }
        next.ServeHTTP(w, r)
    })
}

到此這篇關于詳解Golang實現請求限流的幾種辦法的文章就介紹到這了,更多相關Golang 請求限流內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家! 

您可能感興趣的文章:
  • golang簡易令牌桶算法實現代碼
  • golang高并發限流操作 ping / telnet
  • golang接口IP限流,IP黑名單,IP白名單的實例
  • Golang 限流器的使用和實現示例
  • Golang實現請求限流的幾種辦法(小結)
  • Golang模擬令牌桶進行對訪問的限流方式

標簽:青海 儋州 電子產品 安康 海南 物業服務 遼寧 西雙版納

巨人網絡通訊聲明:本文標題《詳解Golang實現請求限流的幾種辦法》,本文關鍵詞  詳解,Golang,實現,請求,限,;如發現本文內容存在版權問題,煩請?zhí)峁┫嚓P(guān)信息告之我們,我們將及時溝通與處理。本站內容系統采集于網絡,涉及言論、版權與本站無關。
  • 相關文章
  • 下面列出與本文章《詳解Golang實現請求限流的幾種辦法》相關的同類信息!
  • 本頁收集關于詳解Golang實現請求限流的幾種辦法的相關信息資訊供網民參考!
  • 推薦文章