2022最新自拍视频在线观看,97人妻免费碰视频碰免

說明：本文主要講述Laravel的Artisan命令來實現自定義模板，就如經常輸入的php artisan make:controller ShopController就會自動生成一個ShopController.php模板文件一樣，通過命令生成模板也會提高開發效率。同時，作者會將開發過程中的一些截圖和代碼黏上去，提高閱讀效率。

備注：個人平時在寫Repository代碼時會這樣寫，如先寫上ShopRepositoryInterface并定義好接口方法如all()、create()、update()、delete()、findBy()等等，然后再寫上接口對應的實現ShopRepository并注入對應的Model即Shop。別的PostRepository、TagRepository也會是這么寫(當然，對于很多重用的Repository方法可以集體拿到AbstractRepository抽象類里供子類繼承，實現代碼復用)。那能不能直接命令行生成模板文件呢，就不用自己一個個的寫了，就像輸入php artisan make:controller PostController給我一個Controller模板來。

關于使用Repository模式來封裝下Model邏輯，不讓Controller里塞滿了很多Model邏輯，這樣做是有很多好處的，最主要的就是好測試和代碼架構清晰，也符合SOLID原則。如果使用PHPUnit來做測試就知道了為啥說好測試了。SegmentFault上也有相關的文章描述。作者也打算最近新開一篇文章聊一聊這個，PHPUnit也打算過段時間聊一聊。

個人研究了下Artisan命令行，是可以的。經過開發后，結果是輸入自定義指令php artisan make:repository PostRepository --model=Post(這個option可要可不要)，就會幫我生成一個PostRepositoryInterface和對應的接口實現PostRepository。

模板文件Stub

由于個人需要生成一個RepositoryInterface和對應接口實現Repository，那就需要兩個模板文件了。在resources/stubs新建兩個模板文件，以下是個人經常需要的兩個模板文件(你可以自定義)：

 /**
   * @param array $columns
   * @return \Illuminate\Database\Eloquent\Collection|static[]
   */
  public function all($columns = array('*'))
  {
    return $this->$model_var_name->all($columns);
  }

  /**
   * @param int $perPage
   * @param array $columns
   * @return \Illuminate\Contracts\Pagination\LengthAwarePaginator
   */
  public function paginate($perPage = 15, $columns = array('*'))
  {
    return $this->$model_var_name->paginate($perPage, $columns);
  }

  /**
   * Create a new $model_var_name
   * @param array $data
   * @return \$model_namespace
   */
  public function create(array $data)
  {
    return $this->$model_var_name->create($data);
  }

   /**
    * Update a $model_var_name
    * @param array $data
    * @param $id
    * @return \$model_namespace
    */
  public function update($data = [], $id)
  {
    return $this->$model_var_name->whereId($id)->update($data);
  }

  /**
   * Store a $model_var_name
   * @param array $data
   * @return \$model_namespace
   */
  public function store($data = [])
  {
    $this->$model_var_name->id = $data['id'];
    //...
    $this->$model_var_name->save();
  }

  /**
   * Delete a $model_var_name
   * @param array $data
   * @param $id
   * @return \$model_namespace
   */
  public function delete($data = [], $id)
  {
    $this->$model_var_name->whereId($id)->delete();
  }

  /**
   * @param $id
   * @param array $columns
   * @return array|\Illuminate\Database\Eloquent\Collection|static[]
   */
  public function find($id, $columns = array('*'))
  {
    $$model_name = $this->$model_var_name->whereId($id)->get($columns);
    return $$model_name;
  }

  /**
   * @param $field
   * @param $value
   * @param array $columns
   * @return \Illuminate\Database\Eloquent\Collection|static[]
   */
  public function findBy($field, $value, $columns = array('*'))
  {
    $$model_name = $this->$model_var_name->where($field, '=', $value)->get($columns);
    return $$model_name;
  }

}

模板文件里包括參數，這些參數將會根據命令行中輸入的參數和選項被相應替換：

復制代碼代碼如下:

['$repository_namespace', '$model_namespace', '$repository_interface_namespace', '$repository_interface', '$class_name', '$model_name', '$model_var_name']

Artisan命令生成Repository模板文件

生成Artisan命令并注冊

Laravel提供了Artisan命令自定義，輸入指令:

php artisan make:console MakeRepositoryCommand

然后改下簽名和描述：

// app/Console/Commands/MakeRepositoryCommand
  /**
   * The name and signature of the console command.
   *
   * @var string
   */
  protected $signature = 'make:repository {repository} {--model=}';

  /**
   * The console command description.
   *
   * @var string
   */
  protected $description = 'Make a repository and interface';

這里{repository}是必填參數并指明(選填參數加個?，就和路由參數一樣)，將會被$this->argument('repository')方法捕捉到，{--model=}是選項，可填可不填，將會被$this->option('model')方法捕捉到。填上這個命令的描述，最后在Console的Kernel里注冊下命令：

// app/Console/Kernel
protected $commands = [
    // Commands\Inspire::class,
//    Commands\RedisSubscribe::class,
//    Commands\RedisPublish::class,
//    Commands\MakeTestRepositoryCommand::class,
    Commands\MakeRepositoryCommand::class,
  ];

然后輸入php artisan命令后就能看到這個make:repository命令了。

自動化生成RepositoryInterface和Repository文件

在MakeRepositoryCommand.php命令執行文件里寫上模板自動生成邏輯，代碼也不長，有些邏輯也有注釋，可看：

use Config;
use Illuminate\Console\Command;
use Illuminate\Filesystem\Filesystem;
use Illuminate\Support\Composer;

class MakeRepositoryCommand extends Command
{
  /**
   * The name and signature of the console command.
   *
   * @var string
   */
  protected $signature = 'make:repository {repository} {--model=}';

  /**
   * The console command description.
   *
   * @var string
   */
  protected $description = 'Make a repository and interface';

  /**
   * @var
   */
  protected $repository;

  /**
   * @var
   */
  protected $model;

  /**
   * Create a new command instance.
   *
   * @param Filesystem $filesystem
   * @param Composer $composer
   */
  public function __construct(Filesystem $filesystem, Composer $composer)
  {
    parent::__construct();

    $this->files  = $filesystem;
    $this->composer = $composer;
  }

  /**
   * Execute the console command.
   *
   * @return mixed
   */
  public function handle()
  {
    //獲取repository和model兩個參數值
    $argument = $this->argument('repository');
    $option  = $this->option('model');
    //自動生成RepositoryInterface和Repository文件
    $this->writeRepositoryAndInterface($argument, $option);
    //重新生成autoload.php文件
    $this->composer->dumpAutoloads();
  }

  private function writeRepositoryAndInterface($repository, $model)
  {
    if($this->createRepository($repository, $model)){
      //若生成成功,則輸出信息
      $this->info('Success to make a '.ucfirst($repository).' Repository and a '.ucfirst($repository).'Interface Interface');
    }
  }

  private function createRepository($repository, $model)
  {
    // getter/setter 賦予成員變量值
    $this->setRepository($repository);
    $this->setModel($model);
    // 創建文件存放路徑, RepositoryInterface放在app/Repositories,Repository個人一般放在app/Repositories/Eloquent里
    $this->createDirectory();
    // 生成兩個文件
    return $this->createClass();
  }

  private function createDirectory()
  {
    $directory = $this->getDirectory();
    //檢查路徑是否存在,不存在創建一個,并賦予775權限
    if(! $this->files->isDirectory($directory)){
      return $this->files->makeDirectory($directory, 0755, true);
    }
  }

  private function getDirectory()
  {
    return Config::get('repository.directory_eloquent_path');
  }

  private function createClass()
  {
    //渲染模板文件,替換模板文件中變量值
    $templates = $this->templateStub();
    $class   = null;
    foreach ($templates as $key => $template) {
      //根據不同路徑,渲染對應的模板文件
      $class = $this->files->put($this->getPath($key), $template);
    }
    return $class;
  }

  private function getPath($class)
  {
    // 兩個模板文件,對應的兩個路徑
    $path = null;
    switch($class){
      case 'Eloquent':
        $path = $this->getDirectory().DIRECTORY_SEPARATOR.$this->getRepositoryName().'.php';
        break;
      case 'Interface':
        $path = $this->getInterfaceDirectory().DIRECTORY_SEPARATOR.$this->getInterfaceName().'.php';
        break;
    }

    return $path;
  }

  private function getInterfaceDirectory()
  {
    return Config::get('repository.directory_path');
  }

  private function getRepositoryName()
  {
    // 根據輸入的repository變量參數,是否需要加上'Repository'
    $repositoryName = $this->getRepository();
    if((strlen($repositoryName)  strlen('Repository')) || strrpos($repositoryName, 'Repository', -11)){
      $repositoryName .= 'Repository';
    }
    return $repositoryName;
  }

  private function getInterfaceName()
  {
    return $this->getRepositoryName().'Interface';
  }

  /**
   * @return mixed
   */
  public function getRepository()
  {
    return $this->repository;
  }

  /**
   * @param mixed $repository
   */
  public function setRepository($repository)
  {
    $this->repository = $repository;
  }

  /**
   * @return mixed
   */
  public function getModel()
  {
    return $this->model;
  }

  /**
   * @param mixed $model
   */
  public function setModel($model)
  {
    $this->model = $model;
  }

  private function templateStub()
  {
    // 獲取兩個模板文件
    $stubs    = $this->getStub();
    // 獲取需要替換的模板文件中變量
    $templateData = $this->getTemplateData();
    $renderStubs = [];
    foreach ($stubs as $key => $stub) {
      // 進行模板渲染
      $renderStubs[$key] = $this->getRenderStub($templateData, $stub);
    }

    return $renderStubs;
  }

  private function getStub()
  {
    $stubs = [
      'Eloquent' => $this->files->get(resource_path('stubs/Repository').DIRECTORY_SEPARATOR.'Eloquent'.DIRECTORY_SEPARATOR.'repository.stub'),
      'Interface' => $this->files->get(resource_path('stubs/Repository').DIRECTORY_SEPARATOR.'repository_interface.stub'),
    ];

    return $stubs;
  }

  private function getTemplateData()
  {
    $repositoryNamespace     = Config::get('repository.repository_namespace');
    $modelNamespace        = 'App\\'.$this->getModelName();
    $repositoryInterfaceNamespace = Config::get('repository.repository_interface_namespace');
    $repositoryInterface     = $this->getInterfaceName();
    $className          = $this->getRepositoryName();
    $modelName          = $this->getModelName();

    $templateVar = [
      'repository_namespace'      => $repositoryNamespace,
      'model_namespace'        => $modelNamespace,
      'repository_interface_namespace' => $repositoryInterfaceNamespace,
      'repository_interface'      => $repositoryInterface,
      'class_name'           => $className,
      'model_name'           => $modelName,
      'model_var_name'         => strtolower($modelName),
    ];

    return $templateVar;
  }

  private function getRenderStub($templateData, $stub)
  {
    foreach ($templateData as $search => $replace) {
      $stub = str_replace('$'.$search, $replace, $stub);
    }

    return $stub;
  }

  private function getModelName()
  {
    $modelName = $this->getModel();
    if(isset($modelName)  !empty($modelName)){
      $modelName = ucfirst($modelName);
    }else{
      // 若option選項沒寫,則根據repository來生成Model Name
      $modelName = $this->getModelFromRepository();
    }

    return $modelName;
  }

  private function getModelFromRepository()
  {
    $repository = strtolower($this->getRepository());
    $repository = str_replace('repository', '', $repository);
    return ucfirst($repository);
  }

}

這里把一些常量值放在config/repository.php配置文件里了：

?php
/**
 * Created by PhpStorm.
 * User: liuxiang
 * Date: 16/6/22
 * Time: 17:06
 */

return [

  'directory_path' => 'App'.DIRECTORY_SEPARATOR.'Repositories',
  'directory_eloquent_path' => 'App'.DIRECTORY_SEPARATOR.'Repositories'.DIRECTORY_SEPARATOR.'Eloquent',
  'repository_namespace' => 'App\Repositories\Eloquent',
  'repository_interface_namespace' => 'App\Repositories',

];

運行一下看可不可以吧，這里截個圖：

It is working!!!

是可以生成RepositoryInterface和對應的接口實現文件，這里一個是加了--model選項一個沒加的，沒加的話這里第一個指令就默認Model的名稱是Shop。

生成的文件內容不截圖了，看下新生成的ShopRepository.php文件，的確是我想要的模板文件：

?php
/**
 * Created by PhpStorm.
 * User: liuxiang
 */
namespace App\Repositories\Eloquent;

use App\Shop;
use App\Repositories\ShopRepositoryInterface;

class ShopRepository implements ShopRepositoryInterface
{
  /**
   * @var \App\Shop
   */
  public $shop;

  public function __construct(Shop $shop)
  {
    $this->shop = $shop;
  }

  /**
   * @param array $columns
   * @return \Illuminate\Database\Eloquent\Collection|static[]
   */
  public function all($columns = array('*'))
  {
    return $this->shop->all($columns);
  }

  /**
   * @param int $perPage
   * @param array $columns
   * @return \Illuminate\Contracts\Pagination\LengthAwarePaginator
   */
  public function paginate($perPage = 15, $columns = array('*'))
  {
    return $this->shop->paginate($perPage, $columns);
  }

  /**
   * Create a new shop
   * @param array $data
   * @return \App\Shop
   */
  public function create(array $data)
  {
    return $this->shop->create($data);
  }

   /**
    * Update a shop
    * @param array $data
    * @param $id
    * @return \App\Shop
    */
  public function update($data = [], $id)
  {
    return $this->shop->whereId($id)->update($data);
  }

  /**
   * Store a shop
   * @param array $data
   * @return \App\Shop
   */
  public function store($data = [])
  {
    $this->shop->id = $data['id'];
    //...
    $this->shop->save();
  }

  /**
   * Delete a shop
   * @param array $data
   * @param $id
   * @return \App\Shop
   */
  public function delete($data = [], $id)
  {
    $this->shop->whereId($id)->delete();
  }

  /**
   * @param $id
   * @param array $columns
   * @return array|\Illuminate\Database\Eloquent\Collection|static[]
   */
  public function find($id, $columns = array('*'))
  {
    $Shop = $this->shop->whereId($id)->get($columns);
    return $Shop;
  }

  /**
   * @param $field
   * @param $value
   * @param array $columns
   * @return \Illuminate\Database\Eloquent\Collection|static[]
   */
  public function findBy($field, $value, $columns = array('*'))
  {
    $Shop = $this->shop->where($field, '=', $value)->get($columns);
    return $Shop;
  }

}

總結：本文主要用Laravel的Artisan命令來自動生成個人需要的模板，減少平時開發中重復勞動。就像Laravel自帶了很多模板生成命令，用起來會節省很多時間。這是作者在平時開發中遇到的問題，通過利用Laravel Artisan命令解決了，所以Laravel還是挺好玩的。有興趣的可以把代碼扒下來玩一玩，并根據你自己想要的模板做修改。這兩天想就Repository模式封裝Model邏輯的方法和好處聊一聊，到時見。希望對大家的學習有所幫助，也希望大家多多支持腳本之家

您可能感興趣的文章:

Laravel如何自定義command命令淺析
詳細Laravel5.5執行表遷移命令出現表為空的解決方案
laravel通過創建自定義artisan make命令來新建類文件詳解
laravel 創建命令行命令的圖文教程

標簽：呼倫貝爾綏化清遠 安康紹興萊蕪金華溫州

巨人網絡通訊聲明：本文標題《Laravel學習筆記之Artisan命令生成自定義模板的方法》，本文關鍵詞 Laravel,學習,筆記,之,Artisan,；如發現本文內容存在版權問題，煩請?zhí)峁┫嚓P(guān)信息告之我們，我們將及時溝通與處理。本站內容系統采集于網絡，涉及言論、版權與本站無關。